Cement glues
-
Dry mixture intended to glue decorative polysterene foam profiles for indoor and outdoor use. The glue is laid on the foundation using an indented mortar-board. The profiles are pressed onto it, observing the rule of the decorative element’s proper...
-
Dry grey cement based product with added fine mineral fillers, reinforcing mono fibres and polymeric additives. Ready for work after mixing with water. THERMOZID is a cement mixture, designated for: - bonding of boards of expanded and extruded...
-
Dry product, based on special cements, fillers and polymers. Ready for work after mixing with water and homogenizing. TERAZID Class t° compound is DESIGNATED for masonry of chamotte bricks and objects for making in side and outside fireplaces...
-
KLEBESPACHTEL cement glue is a plaster material designed for plastering of heat - insulating surfaces /Expanded and Extruded Polystyrene/ on a cement base, high-tech polymer admixture, polymer fibres, reinforced microfibres and fine fillers. The...
-
Dry cement based product for making compound binder for masonry with YTONG blocks and small concreter blocks. BETONZID is dissolved in water and is homogenized with an electric drill and a stirrer till achieving a plastic binder with no lumps. The...
-
The anchoring cement is dry powder-like mixture of cements, fillers and polymer additives, which after mixing with water provides for prompt binding and provides for high strength several minutes after laying. The anchoring rapidly binding cement...
-
Dry white cement based product for bonding of glass or glass-ceramic tiles for swimming pools. The compound is DESIGNATED for: bonding of glass-ceramic tiles, bonded in a wall panel for facing swimming pools (walls and bottom). TERAZID CT-110 cement...
-
The glue is intended for brick masonry used to erect front, bearing or partitioning walls. The dry material is mixed with water in the proportion indicated on the packaging until a plastic mass is obtained, but for no less than 2-3 minutes. The mixture...