Primavera Multicolore – high quality paint

PRIMAVERA MULTICOLORE

DECLARATION OF PRODUCT CHARACTERISTICS
According with Regulation (BG) RD-02-20-1/2015

№ 20151111-D

1. 1. Unique identification code of product type:
      PRIMAVERA MULTICOLORE

   2. National requirements (Minister of Regional Development and Public Works, national regulation) technical specification (national standard, Bulgarian technical approval) applicable to the construction product:
      EN 13300 – Paints and varnishes – Water-borne coating materials and coating systems for interior walls and ceilings – Classification

   3. Intended use or uses of the construction product in accordance with the national requirements, as foreseen by the manufacturer:
      High quality acrylic-based paint for interior application.

   4. Name, registered trade name or registered trade mark and contact address of the manufacturer:
      TERAZID Ltd.
      5 „5004” Str., Gara Iskar, Sofia 1528, Bulgaria
      tel. +35929799971
      e-mail: office@terazid.com

   5. Where applicable, name and contact address of the authorised representative:
      Not applicable.

   6. Where applicable, name and contact address of the notified body to assess compliance with national requirements:
      1950 – The Research Institute of Building Materials (NIISM), Sofia, Bulgaria
      Test protocol № 580/19.05.2014

   7. Declared performance:

8. The characteristics of the product identified in point 1 are in conformity with the declared performance in point 7.
This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4, or the authorised representative identified in point 5.

PRIMAVERA MULTICOLORE

High quality acrylic-based paint for interior application
Water-dispersion matte paint for interior painting

PURPOSE
PRIMAVERA MULTICOLORE is a water-soluble paint for interior painting with excellent covering capacity, based on acrylic dispersion, polymers, fillers and colouring agents. The product is resistant to washing. It creates a mat surface after drying with velvety finish look.
The purpose of the paint is making fine, matte film on the walls and ceilings of inner rooms, that is resistant to friction and washing. It has an excellent covering capacity.
The paint is manufactured in a wide range of over 1000 colours, separated in groups according to the catalogue of the company producer.

PROPERTIES

• ready for use
• excellent coverage
• easy for application
• wide range of colours
• resistant to washing

PREPARATION OF THE BASE
PRIMAVERA MULTICOLORE is suitable for working on bases such as gypsum plasters, old latex bases, as well as on gypsum boards and old plasters. All types of bases should be primed in advance with TERAZID G-44 to ensure unification of the water absorption of the base and to free it of dust.
The base must be dry, strong, free of grease and dust.
Old non-bearing paints and other coatings should be washed or mechanically removed. For smoothing, filling fine cracks and small roughness, it is recommended to use fine coating such as COLOR KIT, before painting.

CHARACTERISTICS AND TECHNICAL DATA
▪ Colour: according a catalogue
▪ Base: acrylic dispersion with added polymers
▪ Density: 1,52 g/cm³
▪ Work temperature: +5℃ to + 30℃
▪ pH: 7.8
▪ Content of non-volatile substances: 62,62%
▪ Coverage of the wet film: under 144 g/m²

APPLICATION AND PROCESSING
PRIMAVERA MULTICOLORE is ready to use, after it is stirred with the help of an electrical drill with stainless stirrer. Rusty tools are not allowed for usage.
It is applied in two layers, with the help of a brush or a roller until one thick and even cover is achieved.
If it is necessary, the paint can be diluted with water, up to 10% for hand painting and up to 15% for machine painting.
When using two or more colours, it is desirable to separate the different colours with the help of a tape.

CONSUMPTION
▪ about 0,100 – 0,125 l/m² for one layer of paint, depending on the base

TOOLS FOR WORK
▪ electrical drill and stirrer
▪ roller-brush
▪ brush

WEATHER CONDITIONS AT WORK
The minimum twenty-four-hour temperature of the air and the base should not be less than +5˚C, and the maximum – not higher than +30˚C

FORM OF DELIVERY
Liquid in plastic buckets of 3 kg, 5 kg, 12 kg, 20 kg and 24 kg.

NOTES
Characteristics and technical data of the product, pointed out into this Technical Data Sheet are defined at a standard temperature (20˚C) and relative humidity (50%). In other weather conditions, the technological time for some of the processes, mentioned above, could be shorter or longer.
The information of the product is based on the practical experience of the manufacturer and the technical tests in specialized laboratories.
Do not mix with other building materials.
All hazards and precautionary statements about PRIMAVERA MULTICOLORE can be checked in the Safety Data Sheet of the product.

STORAGE
12 months into the originally sealed packages and a temperature from +5˚C to +30˚C. Protect from freezing and direct sunlight.

PRIMAVERA MULTICOLORE 

MATERIAL SAFETY DATA SHEET
According to (EU) 830/2015

1. Identification of the Substance/Mixture and of the Company
1.1. Product identifier – PRIMAVERA MULTICOLORE
1.2. Application of the substance
Acrylic paint for interior application.
1.3. Details of the supplier of the safety data sheet
TERAZID Ltd.
5, 5004 Street, Gara Iskar
1528 Sofia, Bulgaria
tel. +3592/9799971, office@terazid.com
1.4. Emergency telephone number 112
UMHATEM “Pirogov” (toxicology) – +3592/9154409; +3592/9154233

2. Hazards Identification
2.1. Classification of the substance or mixture

• Classification in accordance with the Regulation (ЕО) 1272/2008 – CLP
  The product is not classified as „dangerous“.
  2.2. Label elements
  Precautionary statements:
  P101 – If medical advice is needed, have product container or label at hand.
  P102 – Keep out of reach of children.
  P262 – Do not get in eyes, on skin, or on clothing.
  P305 + P351 + P313 – IF IN EYES: Rinse cautiously with water for several minutes. Get medical advice/attention.
  P280 – Wear protective gloves/protective clothing/eye protection/face protection.
  P301 + P311 – IF SWALLOWED: Call a POISON CENTER or doctor/physician.
  P410 – Protect from sunlight.
  P401 – Store at temperatures higher than +5°C.

2.3. Other hazards
None.
For all warnings and recommendations, see Section 15.

3. Composition/information on ingredients
General chemical description – Acrylic-polymer dispersion, containing pigments and modified additives.
Information of the substances in accordance with CLP 1272/2008/EC
Does not contain products, presenting in this section.

4. First Aid Measures
4.1. Description of the first aid measures
Inhalation – Remove the person to fresh air. If the symptoms continue, immediately seek for qualified medical help.
Skin contact – Immediately rinse the area of the contact with plenty of water, then wash it thoroughly with soap and water.
Eye contact – Rinse with plenty of water for a period of at least 15 minutes and open eyelid. Seek for qualified medical help.
Ingestion – Wash the mouth and the throat. Drink plenty of water. Seek for qualified medical help.

4.2. Most important symptoms and effects, both acute and delayed
None.

4.3. Indication of any immediate medical attention and special treatment needed – see p. 4.1.

5. Firefighting Measures
PRIMAVERA MULTICOLORE is non-combustible and prevents flames from spreading. Does not support combustion of other products.

5.1. Extinguishing media
Water mist, water spray – sprayer, dry chemical, foam, carbon dioxide.
Inappropriate extinguishing media – water under pressure.

5.2. Special hazards, arising from the substance or mixture – Non known

5.3. Advice for firefighters – Standard protective equipment when extinguishing a fire.

6. Accidental Release Measures
6.1. Personal precautions, protective equipment and emergency procedures
Gloves, masks, protective clothing for work. Contact with skin and eyes should be avoided.

6.2. Environmental precautions
Prevent this product from release in the environment. Measures should be taken for preventing contamination of surface and underground watercourses, soil, as well as falling into the drains.
In the event of an accident and/or spill of the product, measures for localization and limitation should be taken, and the collected amount of the product should be temporarily stored into a special, tightly closed and labeled containers, and after that they should be transferred to people, holding permits under the Article 37 of the Waste Management Act (publication SG, issue 53, 2012).

6.3. Methods and materials for containment and cleaning up
The spilled amount should be mechanically removed, and then the place should be washed thoroughly with water in accordance with the measures under art.6.2.
Collected amount should be stored in special, tightly closed and labeled containers and to be temporarily stored on the territory of the company, and after that they should be transferred to people, holding a permit under the Waste Management Act (WMA).

7. Handling and Storage
7.1. Precautions for safe handling
The product should be used only according to its main purpose. Avoid skin and eye contact. Keep the package tightly closed after usage.

7.2. Conditions for safe storage, including any incompatibilities
It should be stored in ventilated and dry places, into the originally sealed containers. Temperatures lower than +5˚C and higher than +40˚C should be avoided.
It should be separately stored from food and drinks.

7.3. Specific Usage
There is no specific usage. It should be used only according to its main purpose.

8. Exposure Controls/Personal Protection
8.1. Control parameters – No special protection measures are necessary.

8.2. Exposure controls
8.2.1. Respiratory protection – prolonged inhalation of fumes should be avoided.
8.2.2. Skin protection – skin contact should be avoided, wear protective gloves. Clothing, soaked with the product should be changed.
8.2.3. Eye protection – eye contact should be avoided, wear safety glasses.
8.2.4. Common protection – it should be stored away from food, drinks and food for animals.

9. Physical and Chemical Properties
9.1. Information on basic physical and chemical properties

• Appearance – liquid material

• Odour – light

• pH at 20˚C – 7.8

• Density – 1.52 g/cm³

• Solubility – partial

• Explosive properties – Non explosive

9.2. Other information – no data.

10. Stability and reactivity
10.1. Reactivity – no hazardous reactions.
10.2. Chemical stability – the product is stable under storage and usage in accordance with the indications.
10.3. Possibility of hazardous reactions – in accordance with section 10.1.
10.4. Conditions to avoid – temperatures lower than +5˚C and higher than 40˚C should be avoided.
10.5. Incompatible materials – no data.
10.6. Hazardous decomposition products – it is unlikely to release carbon oxides at fire.

11. Toxicological information
11.1. Information for the toxicological effects
Toxicological properties of the product are not tested. The product is classified under the conventional method in accordance with Regulation (ЕО) 1272/2008 – CLP. On the basis of its composition, the product can be defined as not having any toxic effects under a proper usage.
Ingestion – The product is not hazardous of acute poisoning.
Inhalation – It is not considered as harmful at normal conditions.
Skin contact – Prolonged contact may cause irritation.
Eye contact – Prolonged and repeated contact may cause irritation and redness.

12. Ecological information
12.1. Toxicity
Polymer dispersion data:
Toxicity to fish:
LC50 (96 h) > 100 mg/l, (OECD Directive 203, static)
Aquatic invertebrates:
ЕC50 (48 h) > 100 mg/l, (OECD Directive 202, part 1, static)
Aquatic plants:
ЕC50 (72 h) > 100 mg/l, (OECD Directive 201)
Micro-organisms/Effect of the active sediment:
ЕC20 (0,5 h) > 100 mg/l, active sediment (DIN EN ISO 8192-OECD 209-88/302/EEC, P. C)
On the basis of the experience, the product is not expected to be hazardous to the environment.

12.2. Persistence and degradability – No data.
12.3. Bio-accumulative potential – Accumulation in the organism is not expected.
12.4. Mobility in soil
This product is not biologically mobile.
12.5. Results of PBT and vPvB assessment – the product meets the criteria of PBT (persistent, bio-accumulative and toxic) and vPvB (very persistent and very bio-accumulative).
12.6. Other adverse effects
No data.
General information: Do not allow the product to enter into the soil or natural watercourses.

13. Disposal considerations
Product waste, such as residual quantities and packages, should be collected into a special, tightly sealed and labelled containers, temporarily stored, and after that to be transferred to people, holding a permit in accordance with article 37 of the Waste Management Act (publication SG, issue 53, 2012).
Waste code, in accordance with Regulation №2 from 23.07.2014 for Waste Classification:
08 01 20 – liquid suspensions of paints, others than those mentioned in 08 01 19
Waste Packages code:
15 01 02 – plastic packages.
Completely empty the packages and dispose them in accordance with the local regulations.

14. Transport information
It is not a hazardous load, in accordance with RID, ADR, ADNR, IMDG, IATA-DGR.
It should be transported under the respective rules for transportation, concerning the respective type of transport and ensuring the safety of the load.

15. Regulatory information
15.1 Content of volatile organic compounds /VOC/, in accordance with the Ordinance on limiting the emissions of volatile organic compounds in the use of organic solvents in certain paints, varnishes and auto reparatory products, category А, sub point c) < 30 g/l

15.2 Classification and labelling of the product in accordance with Regulation (ЕО) 1272/2008 – CLP /full text of the codes/
GHS Pictograms: No.
Signal word: No.
Recommendations for danger (N – codes): None.
Hazard statements (H – codes): None.
Precautionary statements (P – codes):
P101 – If medical advice is needed, have product container or label at hand.
P102 – Keep out of reach of children.
P262 – Do not get in eyes, on skin, or on clothing.
P305 + P351 + P313 – IF IN EYES: Rinse cautiously with water for several minutes. Get medical advice/attention.
P280 – Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P311 – IF SWALLOWED: Call a POISON CENTER or doctor/physician.
P410 – Protect from sunlight.
P401 – Store at temperatures higher than +5°C.

15.3 Legislation
National Legislation:
▪ Law of Protection from the Harmful Impact of the Chemical Substances and Preparations.
▪ Environmental Protection Law.
▪ Health and Safety at Work Act.
▪ Ordinance №3 on the minimum requirements for safety and protection of the workers when using personal protective equipment at the workplace.
▪ Waste Management Act.
▪ Ordinance №2 from 23.07.2014 for Waste Classification.
▪ Ordinance on the order and the method of classification, labelling and packaging of chemical substances and preparations.

European Legislation:
▪ Regulation (ЕО) 1272/2008 – CLP from 16th December 2008, concerning the classification, labelling and packaging of substances and preparations.
▪ Regulation (ЕО) 830/2015 from 28th May 2015.

16. Other Information
16.1. Indication of changes
Format in accordance with Regulation (ЕО) 830/2015 from 28th May 2015 amending Regulation № 1907/2006 (REACH) of the European Parliament.

16.2. Training Advice
In addition to the training programs on environment and health and safety of the workers, the companies need to be sure that their workers read, understand and apply the requirements of the MSDS.

16.3. Additional information
See the application(s) of exposure scenarios for the following substances:
The basic information of the exposure scenarios of the substances in the mixture are included in points 1, 2, 3, 8, 11 and 12.

16.4. Disclaimer
This safety data sheet and the data inside of it are based on industrial and commercial experience of many years and are fully complied with the current active legislation of the Republic of Bulgaria and the European Union. This safety data sheet is not intended to guarantee any specific properties and qualities of the product. The information inside of it is reliable but, on the circumstance, that the product is used in accordance with the indicated conditions and the application, specified on the package and/or in the technical literature.
Responsibility of any other use of the product, including when using it in combination with another product or process is completely under the responsibility of the user. It is understood that the user is responsible for defining the appropriate precautions and for applying the legislation, concerning his own activity.