Color Kit – fine plaster

COLOR KIT

MATERIAL SAFETY DATA SHEET
According to (EU) 830/2015

1. Identification of the Substance/Mixture and of the Company
1.1. Product identifier: COLOR KIT
1.2. Application of the substance:
Fine decorative plaster for interior application.
1.3. Details of the supplier of the safety data sheet:
TERAZID Ltd.
5, 5004 Street, Gara Iskar
1528 Sofia, Bulgaria
tel. +359 2 9799971
e-mail: office@terazid.com
1.4. Emergency telephone number (EU): 112
UMHATEM “Pirogov” (toxicology) – +3592/9154409; +3592/9154233

2. Hazards Identification
2.1. Classification of the substance or mixture:

• Classification in accordance with Regulation (ЕО) 1272/2008 – CLP: The product is classified as „dangerous“.

2.2. Label elements
Hazard pictograms: (awaiting specific pictograms, e.g. GHS05, GHS07)
Please let me know if you would like to continue with the signal word, hazard statements, and precautionary statements.

Signal word: Danger!

Hazard statements:

• H315 – Causes skin irritation.

• H318 – Causes serious eye damage.

• H335 – May cause respiratory irritation.

Precautionary statements:

• P101 – If medical advice is needed, have product container or label at hand.

• P102 – Keep out of reach of children.

• P261 – Avoid breathing dust/fume/gas/mist/vapours/spray.

• P280 – Wear protective gloves/protective clothing/eye protection/face protection.

• P302 + P352 – IF ON SKIN: Wash with plenty of soap and water.

• P332 + P313 – If skin irritation occurs: Get medical advice/attention.

• P305 + P351 + P315 – IF IN EYES: Rinse cautiously with water for several minutes. Get immediate medical advice/attention.

• P402 – Store in a dry place.

2.3. Other hazards
Contains portland cement. When reacting with water, it creates an alkaline medium.
Does not contain soluble Cr (VI) in a quantity greater than 0.0002% within the storage period.
For all warnings and recommendations, see Section 15.

3. Composition/information on ingredients
General chemical description:
Dry mixture based on calcium carbonate, portland cement, and modifying additives.

Information on the substances in accordance with CLP 1272/2008/EC:
Specific details regarding concentration ranges and CAS numbers of classified components are not provided here. Please refer to the full SDS for complete compositional data.

CAS № EINECS №	Name	Concentration (%)	Signal word	H-codes
65997-15-1 266-043-4	White cement	15-20	Hazardous	H315, H318, H335

All warnings can be seen in Section 15.

4. First Aid Measures
4.1. Description of the first aid measures

• Inhalation – Remove the person to fresh air. If symptoms persist, immediately seek qualified medical help.

• Skin contact – Rinse the affected area immediately with plenty of water, then wash thoroughly with soap and water.

• Eye contact – Rinse cautiously with plenty of water for at least 15 minutes while keeping eyelid open. Seek qualified medical help.

• Ingestion – Do not induce vomiting. Seek qualified medical help.

4.2. Most important symptoms and effects, both acute and delayed

• Eye contact – Irritation.

• Skin contact – Redness, inflammation.

4.3. Indication of any immediate medical attention and special treatment needed – See p. 4.1.

5. Firefighting Measures
COLOR KIT is a non-combustible and non-explosive product.

5.1. Extinguishing media

• Suitable: Water mist, water spray, dry chemical, foam, carbon dioxide

• Unsuitable: Not known

5.2. Special hazards arising from the substance or mixture

• None known

5.3. Advice for firefighters

• Use autonomous respiratory equipment

6. Accidental Release Measures
6.1. Personal precautions, protective equipment and emergency procedures

• Wear gloves, a dust mask, and protective clothing

• Avoid contact with skin and eyes

6.2. Environmental precautions
Prevent the product from being released into the environment. Measures must be taken to avoid contamination of surface and underground watercourses, soil, and drains.
In the event of an accident and/or spill, localization and containment measures should be implemented. The collected product should be temporarily stored in special, tightly closed, and labeled containers, then handed over to entities holding permits under Article 37 of the Waste Management Act.

6.3. Methods and materials for containment and cleaning up
The spilled material should be mechanically removed while minimizing dust generation. Any remaining dust or unhardened mixture should be cleaned with water and soap.
The collected material should be stored in special, tightly closed, and labeled containers and temporarily stored on company premises. It should then be transferred to authorized waste management personnel under the Waste Management Act (WMA).

7. Handling and Storage
7.1. Precautions for safe handling
Use the product only as intended. Do not eat, drink, or smoke during handling. Avoid dust formation and ensure frequent ventilation. Prevent contact with skin and eyes.

7.2. Conditions for safe storage, including any incompatibilities
Store in well-ventilated, dry areas in the original sealed packaging. Avoid temperatures below 0°C and above +50°C. Keep stored separately from food and beverages.

7.3. Specific usage
No special use other than the intended decorative application.

8. Exposure Controls/Personal Protection
8.1. Control parameters
Portland cement – permissible limit for inhalable dust: 5 ppm / 5 mg/m³ air.

8.2. Exposure controls

• 8.2.1. Respiratory protection – Use a P2 dust filter mask.

• 8.2.2. Skin protection – Avoid skin contact; wear protective gloves.

• 8.2.3. Eye protection – Avoid eye contact; wear safety glasses.

• 8.2.4. Common protection – Store away from food, drinks, and animal feed.

9. Physical and Chemical Properties
9.1. Information on basic physical and chemical properties

• Appearance: fine powder

• Color: white

• Odor: none

• pH at 20°C: approximately 5.0

• Density: 1.1 kg/m³

• Solubility: insoluble

• Explosive properties: non-explosive

9.2. Other information:
No additional data available.

10. Stability and Reactivity
10.1. Reactivity – The product reacts with moisture and hardens.
10.2. Chemical stability – Stable under proper storage and usage conditions.
10.3. Possibility of hazardous reactions – As described in section 10.1; hardening occurs in the presence of moisture.
10.4. Conditions to avoid – Avoid exposure to moisture during storage and transportation.
10.5. Incompatible materials – No data available.

11. Toxicological Information
11.1. Information for the toxicological effects
Toxicological testing has not been conducted for this product. Classification is based on the conventional method per Regulation (ЕО) 1272/2008 – CLP. Based on its composition, the product is not expected to exhibit toxic effects under normal conditions of use.

• Ingestion – Not likely to cause acute poisoning, but ingestion should be avoided.

• Inhalation – Dust may cause irritation of the nose, throat, and lungs, leading to coughing.

• Skin contact – May cause irritation, especially in combination with heat and sweat; not absorbed through the skin.

• Eye contact – Can cause serious eye damage.

12. Ecological Information
12.1. Toxicity – Not expected to be hazardous to the environment. LC50 in water not defined. However, if large amounts are released into water, the rising pH may be harmful to aquatic organisms.
12.2. Persistence and degradability – No data available.
12.3. Bioaccumulative potential – Low potential for bioaccumulation.
12.4. Mobility in soil – Hard product of non-organic origin.
12.5. Results of PBT and vPvB assessment – The product does not meet the criteria for PBT (persistent, bioaccumulative, and toxic) or vPvB (very persistent and very bioaccumulative).
12.6. Other adverse effects – No data available.

13. Disposal Considerations
Residual product and packaging waste should be collected in tightly sealed and labeled containers, temporarily stored, and then transferred to authorized waste handlers in accordance with Article 37 of the Waste Management Act (SG, issue 53, 2012).

Waste codes in accordance with Regulation №2 from 23.07.2014 for Waste Classification:

• 10 13 – Waste from the production of cement, lime, gypsum, and related materials

• 10 13 14 – Waste concrete and concrete sediment

• 15 01 – Packages

13. Disposal Considerations (continued)
15 01 10* – Packages containing residues of hazardous substances or contaminated with hazardous substances.
Completely empty the packages and dispose of them in accordance with local regulations — at designated facilities for paper waste.

14. Transport Information
The product is not classified as hazardous under the following regulations:

• RID (International Carriage of Dangerous Goods by Rail)

• ADR (European Agreement concerning the International Carriage of Dangerous Goods by Road)

• ADNR (Regulations for the Carriage of Dangerous Substances on the Rhine)

• IMDG (International Maritime Dangerous Goods Code)

• IATA-DGR (International Air Transport Association – Dangerous Goods Regulations)

It should be transported in accordance with applicable transport rules for the specific mode of transport, ensuring load safety.

15. Regulatory Information
15.1. Classification and labeling of the product in accordance with Regulation (ЕО) 1272/2008 – CLP (full text of the codes):

GHS Pictograms:

GHS05 GHS07

15. Regulatory Information (continued)

Signal word: Danger!

Recommendations for danger (N – codes): None

Hazard statements (H – codes):

• H315 – Causes skin irritation.

• H318 – Causes serious eye damage.

• H335 – May cause respiratory irritation.

Precautionary statements (P – codes):

• P101 – If medical advice is needed, have product container or label at hand.

• P102 – Keep out of reach of children.

• P261 – Avoid breathing dust/fume/gas/mist/vapours/spray.

• P280 – Wear protective gloves/protective clothing/eye protection/face protection.

• P302 + P352 – IF ON SKIN: Wash with plenty of soap and water.

• P332 + P313 – If skin irritation occurs: Get medical advice/attention.

• P305 + P351 + P315 – IF IN EYES: Rinse cautiously with water for several minutes. Get immediate medical advice/attention.

• P402 – Store in a dry place.

15.2. Legislation

National Legislation:

• Law of Protection from the Harmful Impact of the Chemical Substances and Preparations

• Environmental Protection Law

• Health and Safety at Work Act

• Ordinance №3 on the minimum requirements for safety and protection of workers when using personal protective equipment at the workplace

• Waste Management Act

• Ordinance №2 from 23.07.2014 for Waste Classification

• Ordinance on the order and method of classification, labeling, and packaging of chemical substances and preparations

European Legislation:

• Regulation (ЕО) 1272/2008 – CLP from 16th December 2008, concerning the classification, labelling, and packaging of substances and preparations

• Regulation (ЕО) 830/2015 from 28th May 2015

16. Other Information

16.1. Indication of changes
Formatted in accordance with Regulation (ЕО) 830/2015 from 28th May 2015, amending Regulation №1907/2006 (REACH) of the European Parliament.

16.2. Training advice
In addition to standard training programs for environmental protection and occupational health and safety, companies must ensure that workers read, understand, and apply the instructions in this Material Safety Data Sheet (MSDS).

16.3. Additional information
For exposure scenario applications, refer to the following sections:

• Sections 1, 2, 3, 8, 11, and 12 contain relevant substance-specific information.

16.4. Disclaimer
This safety data sheet and the contained information are based on long-standing industrial and commercial experience, and fully comply with current Bulgarian and European Union legislation.
This document does not constitute a guarantee of specific product properties or performance.
The information provided is considered reliable only when the product is used as intended, under the conditions specified on the product packaging and/or in the technical documentation.
Any alternative use, including combination with other products or processes, is at the user’s sole responsibility.
The user is expected to define appropriate safety measures and ensure compliance with applicable laws related to their activities.