Primavera Exterior – Polymer facade paint

PRIMAVERA EXTERIOR POLYMER FACADE PAINT

DECLARATION OF PRODUCT CHARACTERISTICS
According with Regulation (BG) RD-02-20-1/2015

№ 20130709-10-D

1. Unique identification code of product type:
   PRIMAVERA EXTERIOR – Polymer facade paint

2. National requirements (Minister of Regional Development and Public Works, national regulation)
   technical specification (national standard, Bulgarian technical approval) applicable to the construction product:
   BDS EN 13300 – Paints and varnishes – Water-borne coating materials and coating systems for interior walls and ceilings – Classification.
   BDS EN 1062-1 – Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete – Part 1: Classification.

3. Intended use or uses of the construction product in accordance with the national requirements, as foreseen by the manufacturer:
   Acrylic-based paint for facades and exterior surfaces.

4. Name, registered trade name or registered trade mark and contact address of the manufacturer:
   „TERAZID” Ltd.
   5 „5004” Str., Gara Iskar, Sofia 1528, Bulgaria
   tel. +35929799971
   e-mail: office@terazid.com

5. Where applicable, name and contact address of the authorised representative:
   Not applicable.

6. Where applicable, name and contact address of the notified body to assess compliance with national requirements:
   1950 – The Research Institute of Building Materials (NIISM), Sofia, Bulgaria
   Test protocol № 1319/18.12.2009

7. Declared performance:

The characteristics of the product identified in point 1 are in conformity with the declared performance in point 7.
This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4, or the authorised representative identified in point 5.

PRIMAVERA EXTERIOR POLYMER FACADE PAINT

Polymer facade paint
High-quality paint for finishing coatings of external walls

PURPOSE
The POLYMER FACADE PAINT is ready for work product, based on high quality dispersions, with added artificial resins, UV-resistant colorants and preservatives. The product is designed for application of fine decorative protective covering on facades, walls and ceilings and it is suitable for both manual and machine applying, on all types of building surfaces.
The POLYMER FACADE PAINT has excellent cover ability and creates colourful water-repellent surface, with very good vapour permeability and durability to heavy weather conditions, preventing the formation of molds, polyps and fungi, on the facades.
Except for painting of new facades and exterior elements, the POLYMER FACADE PAINT is highly recommended for renewing of old structural plasters, providing brand new colour, and keeping the original decorative relief.
The colour scale is created with high-quality, long-lasting pigments, providing choices of 210 colours.

PROPERTIES

• ready for use
• vapour permeable
• resistant to different weather conditions
• UV-resistant

PREPARATION OF THE BASE
The POLYMER FACADE PAINT is suitable for all types of construction bases such as cement, lime, gypsum board, gypsum-fazer, concrete, as well as for dry and paste decorative coatings.
The base must be dry, strong, free of grease and dust.
Base processing with the primer TERAZID G-55 before applying the paint is required.

CHARACTERISTICS AND TECHNICAL DATA
▪ Colour: according to catalogue
▪ Base: acrylic dispersion
▪ Work temperature: +5℃ to + 30℃
▪ Content of non-volatile substances: 60% – 62%
▪ Coverage of the wet film: under 220 g/m²
▪ Resistance to rain: after 24 hours;

APPLICATION AND PROCESSING
The application of the POLYMER FACADE PAINT can start when at least 24 hours after priming the base with TERAZID G-55. The product is ready to use, after it is stirred with the help of an electrical drill with stainless stirrer. Rusty tools are not allowed for usage.
The facade paint is applied without being diluted, with the help of a roller until one thick and even layer is achieved.
When using two or more colours, it is recommendable to separate the different colours with paper tape.

CONSUMPTION
▪ for smooth surfaces – 0.500 kg/m²
▪ for rough surfaces – 0.750 kg/m²

TOOLS FOR WORK
▪ electrical drill and stirrer
▪ roller-brush
▪ brush
▪ paper tape

WEATHER CONDITIONS AT WORK
The minimum twenty-four-hour temperature of the air and the base should not be less than +5˚C, and the maximum – not higher than +30˚C. It should not be applied when there is rain or strong wind, or when the forecast is for rain, as well as in direct sunlight and strong wind.

FORM OF DELIVERY
Liquid in a plastic bucket of 5 kg and 25 kg.

NOTES
Characteristics and technical data of the product, pointed out into this Technical Data Sheet are defined at a standard temperature (20˚C) and relative humidity (50%). In other weather conditions, the technological time for some of the processes, mentioned above, could be shorter or longer.
The information of the product is based on the practical experience of the manufacturer and the technical tests in specialized laboratories.
Do not mix with other building materials.
All hazards and precautionary statements about PRIMAVERA EXTERIOR – POLYMER FACADE PAINT can be checked in the Safety Data Sheet of the product.

STORAGE
12 months into the originally sealed packages and a temperature from +5˚C to +30˚C. Protect from freezing and direct sunlight.

PRIMAVERA EXTERIOR POLYMER FACADE PAINT

MATERIAL SAFETY DATA SHEET
According to (EU) 830/2015

1. Identification of the Substance/Mixture and of the Company
1.1. Product identifier – PRIMAVERA EXTERIOR – POLYMER FACADE PAINT
1.2. Application of the substance
Polymeric facade paint.
1.3. Details of the supplier of the safety data sheet
TERAZID Ltd.
5, 5004 Street, Gara Iskar
1528 Sofia, Bulgaria
tel. +3592/9799971, office@terazid.com
1.4. Emergency telephone number 112
UMHATEM “Pirogov” (toxicology) – +3592/9154409; +3592/9154233

2. Hazards Identification
2.1. Classification of the substance or mixture

• Classification in accordance with the Regulation (ЕО) 1272/2008 – CLP
  The product is not classified as „dangerous“.
  2.2. Label elements
  Precautionary statements:
  P101 – If medical advice is needed, have product container or label at hand.
  P102 – Keep out of reach of children.
  P262 – Do not get in eyes, on skin, or on clothing.
  P305 + P351 + P313 – IF IN EYES: Rinse cautiously with water for several minutes. Get medical advice/attention.
  P280 – Wear protective gloves/protective clothing/eye protection/face protection.
  P301 + P311 – IF SWALLOWED: Call a POISON CENTER or doctor/physician.
  P410 – Protect from sunlight.
  P401 – Store at temperatures higher than +5°C.

2.3. Other hazards
None.
For all warnings and recommendations, see Section 15.

3. Composition/information on ingredients
General chemical description – Acrylic-polymer dispersion, containing pigments and modified additives.
Information of the substances in accordance with CLP 1272/2008/EC
Does not contain products, presenting in this section.

4. First Aid Measures
4.1. Description of the first aid measures
Inhalation – Remove the person to fresh air. If the symptoms continue, immediately seek for qualified medical help.
Skin contact – Immediately rinse the area of the contact with plenty of water, then wash it thoroughly with soap and water.
Eye contact – Rinse with plenty of water for a period of at least 15 minutes and open eyelid. Seek for qualified medical help.
Ingestion – Wash the mouth and the throat. Drink plenty of water. Seek for qualified medical help.

4.2. Most important symptoms and effects, both acute and delayed
None.

4.3. Indication of any immediate medical attention and special treatment needed – see p. 4.1.

5. Firefighting Measures
PRIMAVERA EXTERIOR – POLYMER FACADE PAINT is non-combustible and prevents flames from spreading. Does not support combustion of other products.

5.1. Extinguishing media
Water mist, water spray – sprayer, dry chemical, foam, carbon dioxide.
Inappropriate extinguishing media – water under pressure.

5.2. Special hazards, arising from the substance or mixture – Non known

5.3. Advice for firefighters – Standard protective equipment when extinguishing a fire.

6. Accidental Release Measures
6.1. Personal precautions, protective equipment and emergency procedures
Gloves, masks, protective clothing for work. Contact with skin and eyes should be avoided.

6.2. Environmental precautions
Prevent this product from release in the environment. Measures should be taken for preventing contamination of surface and underground watercourses, soil, as well as falling into the drains.
In the event of an accident and/or spill of the product, measures for localization and limitation should be taken, and the collected amount of the product should be temporarily stored into a special, tightly closed and labeled containers, and after that they should be transferred to people, holding permits under the Article 37 of the Waste Management Act (publication SG, issue 53, 2012).

6.3. Methods and materials for containment and cleaning up
The spilled amount should be mechanically removed, and then the place should be washed thoroughly with water in accordance with the measures under art.6.2.
Collected amount should be stored in special, tightly closed and labeled containers and to be temporarily stored on the territory of the company, and after that they should be transferred to people, holding a permit under the Waste Management Act (WMA).

7. Handling and Storage
7.1. Precautions for safe handling
The product should be used only according to its main purpose. Avoid skin and eye contact. Keep the package tightly closed after usage.

7.2. Conditions for safe storage, including any incompatibilities
It should be stored in ventilated and dry places, into the originally sealed containers. Temperatures lower than +5˚C and higher than +40˚C should be avoided.
It should be separately stored from food and drinks.

7.3. Specific Usage
There is no specific usage. It should be used only according to its main purpose.

8. Exposure Controls/Personal Protection
8.1. Control parameters – No special protection measures are necessary.

8.2. Exposure controls
8.2.1. Respiratory protection – prolonged inhalation of fumes should be avoided.
8.2.2. Skin protection – skin contact should be avoided, wear protective gloves. Clothing, soaked with the product should be changed.
8.2.3. Eye protection – eye contact should be avoided, wear safety glasses.
8.2.4. Common protection – it should be stored away from food, drinks and food for animals.

9. Physical and Chemical Properties
9.1. Information on basic physical and chemical properties

• Appearance – liquid material

• Odour – light

• pH at 20˚C – 6.4

• Density – 1.62 g/cm³

• Solubility – partial

• Explosive properties – Non explosive

9.2. Other information – no data.

10. Stability and reactivity
10.1. Reactivity – no hazardous reactions.
10.2. Chemical stability – the product is stable under storage and usage in accordance with the indications.
10.3. Possibility of hazardous reactions – in accordance with section 10.1.
10.4. Conditions to avoid – temperatures lower than +5˚C and higher than 40˚C should be avoided.
10.5. Incompatible materials – no data.
10.6. Hazardous decomposition products – it is unlikely to release carbon oxides at fire.

11. Toxicological information
11.1. Information for the toxicological effects
Toxicological properties of the product are not tested. The product is classified under the conventional method in accordance with Regulation (ЕО) 1272/2008 – CLP. On the basis of its composition, the product can be defined as not having any toxic effects under a proper usage.
Ingestion – The product is not hazardous of acute poisoning.
Inhalation – It is not considered as harmful at normal conditions.
Skin contact – Prolonged contact may cause irritation.
Eye contact – Prolonged and repeated contact may cause irritation and redness.

12. Ecological information
12.1. Toxicity
Polymer dispersion data:
Toxicity to fish:
LC50 (96 h) > 100 mg/l, (OECD Directive 203, static)
Aquatic invertebrates:
ЕC50 (48 h) > 100 mg/l, (OECD Directive 202, part 1, static)
Aquatic plants:
ЕC50 (72 h) > 100 mg/l, (OECD Directive 201)
Micro-organisms/Effect of the active sediment:
ЕC20 (0,5 h) > 100 mg/l, active sediment (DIN EN ISO 8192-OECD 209-88/302/EEC, P. C)
On the basis of the experience, the product is not expected to be hazardous to the environment.

12.2. Persistence and degradability – No data.
12.3. Bio-accumulative potential – Accumulation in the organism is not expected.
12.4. Mobility in soil
This product is not biologically mobile.
12.5. Results of PBT and vPvB assessment – the product meets the criteria of PBT (persistent, bio-accumulative and toxic) and vPvB (very persistent and very bio-accumulative).
12.6. Other adverse effects
No data.
General information: Do not allow the product to enter into the soil or natural watercourses.

13. Disposal considerations
Product waste, such as residual quantities and packages, should be collected into a special, tightly sealed and labelled containers, temporarily stored, and after that to be transferred to people, holding a permit in accordance with article 37 of the Waste Management Act (publication SG, issue 53, 2012).
Waste code, in accordance with Regulation №2 from 23.07.2014 for Waste Classification:
08 01 20 – liquid suspensions of paints, others than those mentioned in 08 01 19
Waste Packages code:
15 01 02 – plastic packages.
Completely empty the packages and dispose them in accordance with the local regulations.

14. Transport information
It is not a hazardous load, in accordance with RID, ADR, ADNR, IMDG, IATA-DGR.
It should be transported under the respective rules for transportation, concerning the respective type of transport and ensuring the safety of the load.

15. Regulatory information
15.1 Content of volatile organic compounds /VOC/, in accordance with the Ordinance on limiting the emissions of volatile organic compounds in the use of organic solvents in certain paints, varnishes and auto reparatory products, category А, sub point c) 13,4 g/l < 40 g/l

15.2 Classification and labelling of the product in accordance with Regulation (ЕО) 1272/2008 – CLP /full text of the codes/
GHS Pictograms: No.
Signal word: No.
Recommendations for danger (N – codes): None.
Hazard statements (H – codes): None.
Precautionary statements (P – codes):
P101 – If medical advice is needed, have product container or label at hand.
P102 – Keep out of reach of children.
P262 – Do not get in eyes, on skin, or on clothing.
P305 + P351 + P313 – IF IN EYES: Rinse cautiously with water for several minutes. Get medical advice/attention.
P280 – Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P311 – IF SWALLOWED: Call a POISON CENTER or doctor/physician.
P410 – Protect from sunlight.
P401 – Store at temperatures higher than +5°C.

15.3 Legislation
National Legislation:
▪ Law of Protection from the Harmful Impact of the Chemical Substances and Preparations.
▪ Environmental Protection Law.
▪ Health and Safety at Work Act.
▪ Ordinance №3 on the minimum requirements for safety and protection of the workers when using personal protective equipment at the workplace.
▪ Waste Management Act.
▪ Ordinance №2 from 23.07.2014 for Waste Classification.
▪ Ordinance on the order and the method of classification, labelling and packaging of chemical substances and preparations.

European Legislation:
▪ Regulation (ЕО) 1272/2008 – CLP from 16th December 2008, concerning the classification, labelling and packaging of substances and preparations.
▪ Regulation (ЕО) 830/2015 from 28th May 2015.

16. Other Information
16.1. Indication of changes
Format in accordance with Regulation (ЕО) 830/2015 from 28th May 2015 amending Regulation № 1907/2006 (REACH) of the European Parliament.

16.2. Training Advice
In addition to the training programs on environment and health and safety of the workers, the companies need to be sure that their workers read, understand and apply the requirements of the MSDS.

16.3. Additional information
See the application(s) of exposure scenarios for the following substances:
The basic information of the exposure scenarios of the substances in the mixture are included in points 1, 2, 3, 8, 11 and 12.

16.4. Disclaimer
This safety data sheet and the data inside of it are based on industrial and commercial experience of many years and are fully complied with the current active legislation of the Republic of Bulgaria and the European Union. This safety data sheet is not intended to guarantee any specific properties and qualities of the product. The information inside of it is reliable but, on the circumstance, that the product is used in accordance with the indicated conditions and the application, specified on the package and/or in the technical literature.
Responsibility of any other use of the product, including when using it in combination with another product or process is completely under the responsibility of the user. It is understood that the user is responsible for defining the appropriate precautions and for applying the legislation, concerning his own activity.